Finished Sanding ‘Minnow’s’ Topsides

 

This will look much better when painted.

 

Note that the copper antifouling is still good.

 

Wear caused by a fender.

After two-and-a-half hours I finished sanding ‘Minnow’s’ topsides. If I sanded too vigorously I would reveal the heads of copper tacks or bronze nails; therefore I had to take care by sanding just enough for keying the surface in readiness for a coating of Pre-Kote, an undercoat made by International Yacht Paint for their Toplac range.

Link

International Yacht Paint

http://www.international-marine.com/MarineHome.aspx